Steel mechanism for Colombo Design tilt/turnwindow handles. Please select correct version for your windows hardware.   

Steel Graz mechanism only for  Colombo Design Cremonese . Select the correct version for your windows hardware.   

Steel Graz mechanism for Hoppe cremonese window handles. For only alluminium  cremonese handles . Select the correct version for your windows hardware.   

Spindle adapter for spindle square. From 6/8 mm or 7/8 mm. Select the desired size to the side.

Steel Graz mechanism for Hoppe cremonese window handles. For only  cremonese brass handles . Select the correct version for your windows hardware.   

Spindle square 8x8x130 mm to connect a revolving lever handle and a fixed door knob.

Spring cassette for rose Colombo Design for Ø 45 mm. Adaptable with the  <span...

Spring cassette without spring for rose Colomb o Design for Ø 50 mm. Hole 8x8 mm Made of plastic

Spring cassette for rose Colombo Design for Ø 50 mm. Hole 8x8 mm Ambidextrous Made of plastic

Steel grub screw with diameter 6 mm, length 12mm.

Spindle square 8x8x130 mm to connect a handle set by Hoppe. 

Spindle square by Ghidini 7x7x75 mm to fix the window handles. 

Maniglione 25x25mm con 2 supporti dritti

Pair spring cassette for Hoppe patio door handles.

Expanding Spindle square 8x8x55 mm to connect a lever handle on armored door.

Dummy adapter  for rose with diameter 50 mm.

Fixing set to fix single  pull handles without rose .  Minimum thickness required 30mm.

Fixing set to fix single  pull handles . Door tickness supported:  1,5:4 mm. Diameter 13 mm.   For wood profile ticknes 30 mm.

Steel mechanism for Reguitti tilt/turnwindow handles. Please select correct version for your windows hardware.   

Fixing set to fix couple  pull handles with rose . For wood or glass,  thickness 5 - 60 mm, and 61 - 100 mm.

Fixing set to fix single  pull handles with rose . For wood or glass,  thickness 5 - 500 mm.

Fixing set to fix single  pull handles with rose . 

Fixing set to fix couple  pull handles without rose . For wood or glass,  thickness 5 - 70 mm, and 71 - 110 mm.

Fixing set to fix single  pull handles without rose . For wood or glass,  thickness 5 - 60 mm.

Steel Graz mechanism only for Olivari Cremonese . Select the correct version for your windows hardware.   

Steel mechanism for Colombo Design tilt/turnwindow handles dk Zero. Only suitable with Dk Zero Colombo Design. 

DK con rosetta 30x65 mm 8 Scatti 7x42

Steel Graz mechanism only for Antologhia Cremonese . Select the correct version for your windows hardware.   

Pair of M5 threaded screws for DK handles for windows. Suitable for any profile.

Steel allen wrench of 3 mm, to fix grub screws of  6 mm.

Spindle adapter from 6 to 7 mmm and/or 8 mm.